PROJECT 6
Partner:
Technische Universität, Dresden
Dr. Licht GmbH, Nümbrecht
Flachglas Sachsen GmbH, Grimma
extendit digital solutions GmbH,
Nümbrecht
Granted by:
BMWI – Zentrales Innovationsprogramm
Mittelstand (ZIM)
Friedrich-Engels-Straße 12, 51545 Waldbröl, Germany
Mon.-Thu. 7:30 - 4:30, Fri. 7:30 - 2:00
+49 2291 90135 11
Research & Technology
Project Manager:
Prof. Dr.-Ing. Bernhard Weller
Employee:
Dipl.-Ing. Maximilian Möckel
COOLGLASS
Project Time 2019-2021
Combining glazed glass with both heating and cooling features, UV protection, privacy and tint. This ongoing research project continues to progress in combining triple insulating glazing, adjustable surface heating / cooling and an intelligent sun protection system in one component. In the course of environmental compatibility, COOLGLASS is to be self-sufficient with integrated photovoltaic modules.
BACKPOINT SYSTEM
Glass element:
Backpoint glass holding system for laminated safety glass
PROJEKT 5
Partner:
Technische Universität, Dresden
Granted by:
BMWI – Zentrales Innovationsprogramm
Mittelstand (ZIM)
Project Management:
Prof. Dr.-Ing. Bernhard Weller
Employee:
N.N.
ADHESIVE GLASS PARTITIONS
Development of a glued, modular stainless steel and glass connection that is suitable for fall-proof glazing (parapets), glass partition walls, atrium glazing with fall-protection function and shower partition walls.
M.O.S.E.S.
Transportable Partition System
M.O.S.E.S. – mobile partition system with switchable glass
PROJECT 4
Partner:
Technische Universität, Dresden
ADCO Technik GmbH
B+G Ingenieure Bollinger und Grohmann
GmbH
BONDA Balkon- und Glasbau GmbH
Clean-Lasersysteme GmbH
EuroLam GmbH
Glaswerkstätten Frank Ahne GmbH
HELIMA GmbH
Innotech Marketing und Konfektion
Rot GmbH
PAZDERA AG
Polartherm Flachglas GmbH
Preussenglas GmbH
Sura Instruments GmbH
VERROTEC GmbH
Wellmann Technologies GmbH
Universität Kassel, Fachgebiet für
Trennende und Fügende Fertigungsverfahren
Projekt Manager:
Prof. Dr.-Ing. Bernhard Weller
Employee:
Dr.-Ing. Felix Nicklisch
Dr.-Ing. Silke Tasche
KLEBTECH
Klebtech was founded in October 2018 by 15 companies and two research institutions. The main topics of the project are quality assurance and damage tolerance of adhesive technology.
The focus is on material composites of glass without mechanical fasteners and more efficient handling of glass. The origin of this innovation is to make glued glazing suitable for everyday use and to develop non-destructive quality control through innovative sensor monitoring.
NEXT HS
Hinge for doors and windows
Next HS
PROJECT 3
Partner:
Technische Universität, Dresden
Thiele Glas Werk GmbH, Wermsdorf
Granted by:
BMWI – Zentrales Innovationsprogramm
Mittelstand (ZIM)
Project Manager:
Prof. Dr.-Ing. Bernhard Weller
Employee:
Dipl.-Ing. (FH) Jens Oman
SPANNGLAS ROOF SYSTEM
Up to now, overhead glazing has required additional construction supervision and approval. This project explores the possibilities of a regulated, modular roof system with prestressed reinforcement.
PANDA
Shower pre wall installation with laminated safety glass
P|A|N|D|A
PROJECT 2
Partner:
Technische Universität, Dresden
Thiele Glas Werk GmbH, Wermsdorf
Granted by:
BMWI – Zentrales Innovationsprogramm
Mittelstand (ZIM)
Project Manager:
Prof. Dr.-Ing. Bernhard Weller
Employee:
Dipl.-Ing. Michael Engelmann
GLASS RACK WITH
REINFORCEMENT – TENSIONED GLASS RACK
The use of laminated glass in combination with glass supports has been so far been unsatisfactory due to the brittleness of the glass. This project aims to increase the load-bearing capacity by prestressing with reinforcement. This project explores the possibilities of a regulated, modular roof system with prestressed reinforcement.
DISPENSER HANDLE
Door Handle
fillable with soap and disinfectant
PROJECT 1
Partner:
Technische Universität, Dresden
Granted by:
BMWI – Zentrales Innovationsprogramm
Mittelstand (ZIM)
Project Manager:
Prof. Dr.-Ing. Bernhard Weller
Employee:
Dipl.-Ing. Lutz Tautenhahn
PV-BOND: POINTLY GLUE PHOTOVOLTAIC MODULES
This project dealt with environmentally friendly energy generation through the use of solar modules in glass facades. In this project, rear adhesive fastenings for thin-film PV modules were developed and tested. The holders can be attached to existing substructures from different manufacturers.
